StoreMore Expandable Pan & Lid Rack FAQs

Instructions  

How to Assemble: 

1. Place the base on a flat surface and hold both ends. Lift and pull the top part to expand the base to your desired width. 
2. Set the top part down so that holes are aligned. The center button (bottom part) should fit in a center long slot (top part).
3. Insert one end of a wire divider into an open slot on the base. Squeeze the other end of the divider into the open slot on the opposite side of the base. Release to lock in place. 
4. Repeat with remaining dividers, positioning as necessary to properly fit your items. We recommend fitting the dividers as close as possible to keep everything upright and easy to remove. 

CARE INSTRUCTIONS:  Wash by hand with lukewarm water and mild soap; NOT dishwasher safe.

Product Dimensions:

#50377

Fixing Loose Wire Dividers

If your wire dividers feel loose or are popping out of the insert holes, follow these simple steps to improve their fit:

1. Remove the Divider – Take the wire divider out of the base.
2. Adjust the Tension – Gently pull each side of the wire divider outward to create an increase in tension.
3. Reinsert the Divider – Place the ends of the divider back into the insert holes. The added tension should help secure it firmly in place. This quick adjustment ensures your dividers stay stable and function as intended.