Place the base on a flat surface and hold both ends. Lift and pull the top part to expand the base to your desired width.
Set the top part down so that holes are aligned and the center button (bottom part) fits through a center slot (top part).
Insert one end of a wire divider into an open slot on the base. Squeeze the other end of the divider into the open slot on the opposite side of the base. Release to lock in place.
Repeat with remaining dividers, positioning as necessary to properly fit your items. We recommend fitting the dividers as close as possible to keep everything up right and easy to remove.
Comments
0 comments
Article is closed for comments.