RollDown® Can Dispenser FAQ

Instructions

How to Assemble:

1. Align the circle and square pegs of the bottom tray with the corresponding holes of the vertical support beams. Press together.
2. Use two hands to bend dividers and push down into the side wall slots at your desired location. You should hear a click when the divider is securely in place.
3. Flip the tray upright so rubber feet are on the table. Align holes of bottom tray with vertical support clips and firmly press each connection with two thumbs until you hear a click*.
4. Place the top tray on the vertical supports. Align holes of the top tray with vertical support clips and firmly press each connection until you hear a click*.

*Please note this is a one-time lock and cannot be undone.

CARE INSTRUCTIONS:  Wash by hand with lukewarm water and mild soap; NOT dishwasher safe.

What size is the RollDown® Can Dispenser?

#50842

How to load the RollDown® Can Dispenser?

Load cans starting from the front to the back of the dispenser, pushing cans back as you add more.